FPIT

Section: Devices and Network Interfaces (4)
Updated: xf86-input-fpit 1.4.0
Index Return to Main Contents
 

NAME

fpit - Fujitsu Stylistic input driver  

SYNOPSIS

Section N'34'InputDeviceN'34'
  Identifier N'34'idevnameN'34'
  Driver N'34'fpitN'34'
  Option N'34'DeviceN'34'   N'34'devpathN'34'
  ...
EndSection
 

DESCRIPTION

fpit is an Xorg input driver for Fujitsu Stylistic Tablet PCs.

The fpit driver functions as a pointer input device, and may be used as the X server's core pointer.  

SUPPORTED HARDWARE

This driver supports the touchscreen of the Stylistic LT and (with special options) of the Stylistic 500, 1000, 1200, 2300, and 3400. Modern FinePoint MP800 devices will also work with this driver.

Under Linux the Fujitsu's serial port is not, by default, detected. Therefore the port must be configured manually as described in the accompanying readme.txt file.

For example, add the following to your startup scripts for Stylistic xx00 devices:

setserial /dev/ttyS3 autoconfig
setserial /dev/ttyS3 IRQ 15 baud_base 115200 port 0xfce8

This driver now supports Stylistic 3400 (and possibly other passive-pen systems) with a special "Passive" paramter. Try this serial configuration for the 3400:

setserial /dev/ttyS3 autoconfig
setserial /dev/ttyS3 uart 16450 irq 5 port 0xfd68

 

CONFIGURATION DETAILS

Please refer to xorg.conf(5x) for general configuration details and for options that can be used with all input drivers. This section only covers configuration details specific to this driver.

The device supports the following options:

Option MaximumXPosition number
Sets the maximum X position, use this to calibrate your touchscreen's right hand edge.
Option MinimumXPosition number
Sets the minimum X position, use this to calibrate your touchscreen's left hand edge.
Option MaximumYPosition number
Option MinimumYPosition number
Same as for X axis, but for Y axis.
Option InvertX
Option InvertY
Invert the specified axis.
Option SwapXY
Swap the X and Y axis (after inversions).
Option Rotate CW
Option Rotate CWW Manipulate the invert and swap options to match screen rotations. (Will behave strangely if combined with invert or swap options.) New users should consider the "TrackRandR" option instead.
Option DeviceName name
Option DeviceName name sets the name of the X device.
Option AlwaysCore on
enables the sharing of the core pointer. When this feature is enabled, the device will take control of the core pointer (and thus will emit core events) and at the same time will be able, when asked so, to report extended events. You can use the last available integer feedback to control this feature. When the value of the feedback is zero, the feature is disabled. The feature is enabled for any other value.
Option DebugLevel number
sets the level of debugging info reported.
Option BaudRate 38400, 19200 (default) or 9600
changes the serial link speed.
Option Passive
decodes the passive pen. Option TrackRandR automatically keeps the cursor synchronized with the pen's position, even when the screen is resized or rotated. (Recommended for tablet PC's.)

Example, for Stylistic LT setup is:

Section N'34'InputDeviceN'34'
  Identifier N'34'mouse0N'34'
  Driver N'34'fpitN'34'
  Option N'34'DeviceN'34'   N'34'/dev/ttyS3N'34'
  # Option N'34'TrackRandRN'34'
EndSection

And for other Stylistic devices try:

Section N'34'InputDeviceN'34'
  Identifier N'34'mouse0N'34'
  Driver N'34'fpitN'34'
  Option N'34'DeviceN'34'   N'34'/dev/ttyS3N'34'
  Option N'34'BaudRateN'34' N'34'19200N'34'
  Option N'34'MaximumXPositionN'34' N'34'6250N'34'
  Option N'34'MaximumYPositionN'34' N'34'4950N'34'
  Option N'34'MinimumXPositionN'34' N'34'130N'34'
  Option N'34'MinimumYPositionN'34' N'34'0N'34'
  Option N'34'InvertYN'34'
  # Option N'34'TrackRandRN'34'
EndSection

For Stylistic 3400:

Section N'34'InputDeviceN'34'
  Identifier N'34'mouse0N'34'
  Driver N'34'fpitN'34'
  Option N'34'DeviceN'34'   N'34'/dev/ttyS3N'34'
  Option N'34'BaudRateN'34' N'34'9600N'34'
  Option N'34'MaximumXPositionN'34' N'34'4070N'34'
  Option N'34'MaximumYPositionN'34' N'34'4020N'34'
  Option N'34'MinimumXPositionN'34' N'34'0N'34'
  Option N'34'MinimumYPositionN'34' N'34'0N'34'
  Option N'34'PassiveN'34'
  Option N'34'SendCoreEventsN'34'
  # Option N'34'TrackRandRN'34'
EndSection

 

SEE ALSO

Xorg(1), xorg.conf(5), Xserver(1), X(7).  

AUTHORS

Original FPIT port: Rob Tsuk <[email protected]> and John Apfelbaum <[email protected]>

X4 Port: Richard Miller-Smith <[email protected]>, based on Elographics code from: Patrick Lecoanet

X4.2 Cleanup: Alan Cox


 

Index

NAME
SYNOPSIS
DESCRIPTION
SUPPORTED HARDWARE
CONFIGURATION DETAILS
SEE ALSO
AUTHORS

This document was created by man2html, using the manual pages.
Time: 05:33:53 GMT, December 24, 2015